Home page

How to ensure the reliable operation of the bearing

Release time:

2022-03-29

(Summary description)Generally speaking, pay attention to the following points from the perspective of use

Generally speaking, pay attention to the following points from the perspective of use:

1. The bearing clearance should be appropriate. If it is too large, it will cause impact, if it is too small, it will be poorly lubricated and may burn bushes;

2. The surface quality and geometry of bearings and journals should be strictly guaranteed;

3. Improve lubrication quality, control oil pressure, temperature and flow, and strengthen oil filtration;

4. Use fuel and lubricating oil that meet the requirements.

In order for the bearing to give full play to and maintain its due performance for a long time, it is necessary to do a good job of regular maintenance (regular inspection). Through appropriate regular inspections, it is very important to improve productivity and economy to detect faults early and prevent accidents before they occur.

Latest News

The historical development of bearings

(Summary description)The early form of linear motion bearings was to place a row of wooden poles under a row of skid plates. Modern linear motion bearings use the same working principle, but sometimes use balls instead of

2022-03-29

Whether the bearing is installed correctly affects the accuracy, life and performance.

(Summary description)Whether the bearing is installed correctly affects the accuracy, life and performance.Therefore, the design and assembly department must fully study the bearing installation. Hope to install in accord

2022-03-29

How to ensure the reliable operation of the bearing

(Summary description)Generally speaking, pay attention to the following points from the perspective of use

2022-03-29

The sealing of the bearing can be divided into two types: self-sealing and external sealing.

(Summary description)The sealing of the bearing can be divided into two types: self-sealing and external sealing. The so-called bearing with its own seal is to make the bearing itself into a device with sealing performanc

2022-03-29

Bearing function

(Summary description)In terms of its function, it should be support, that is, it is used to support the shaft literally, but this is only part of its function. The essence of support is to be able to bear radial loads.

2022-03-29

Whether the bearing is installed correctly affects the accuracy, life and performance.

2022-03-29