Home page

Bearing function

Release time:

2022-03-29

(Summary description)In terms of its function, it should be support, that is, it is used to support the shaft literally, but this is only part of its function. The essence of support is to be able to bear radial loads.

In terms of its function, it should be support, that is, it is used to support the shaft literally, but this is only part of its function. The essence of support is to be able to bear radial loads. It can also be understood as it is used to fix the shaft. The automatic selection of bearings is included. It is to fix the shaft so that it can only achieve rotation, while controlling its axial and radial movement. The motor cannot work at all without bearings. Because the shaft may move in any direction, and the motor is required to only rotate when it is working. Theoretically speaking, it is impossible to achieve the role of transmission. Not only that, the bearing will also affect the transmission. In order to reduce this impact, good lubrication must be achieved on the bearings of the high-speed shaft. Some bearings themselves are already lubricated, which are called pre-lubricated bearings. Most bearings must have lubricating oil, which is responsible for not only increasing energy consumption due to friction when running at high speeds, but even more frighteningly, it is easy to damage the bearings. The idea of turning sliding friction into rolling friction is one-sided, because there is something called a sliding bearing.

Latest News

The historical development of bearings

(Summary description)The early form of linear motion bearings was to place a row of wooden poles under a row of skid plates. Modern linear motion bearings use the same working principle, but sometimes use balls instead of

2022-03-29

Whether the bearing is installed correctly affects the accuracy, life and performance.

(Summary description)Whether the bearing is installed correctly affects the accuracy, life and performance.Therefore, the design and assembly department must fully study the bearing installation. Hope to install in accord

2022-03-29

How to ensure the reliable operation of the bearing

(Summary description)Generally speaking, pay attention to the following points from the perspective of use

2022-03-29

The sealing of the bearing can be divided into two types: self-sealing and external sealing.

(Summary description)The sealing of the bearing can be divided into two types: self-sealing and external sealing. The so-called bearing with its own seal is to make the bearing itself into a device with sealing performanc

2022-03-29

Bearing function

2022-03-29

Whether the bearing is installed correctly affects the accuracy, life and performance.

2022-03-29