Home page

Whether the bearing is installed correctly affects the accuracy, life and performance.

Release time:

2022-03-29

(Summary description)Whether the bearing is installed correctly affects the accuracy, life and performance.Therefore, the design and assembly department must fully study the bearing installation. Hope to install in accord

Whether the bearing is installed correctly affects the accuracy, life and performance.Therefore, the design and assembly department must fully study the bearing installation. Hope to install in accordance with operating standards. The operating standard items are usually as follows:

(1) Clean the bearing and its related parts

(2) Check the size and finishing of related parts

(3) Installation

(4) Inspection after bearing installation

(5) Supply lubricant

It is hoped that the bearing package will be opened just before the installation. General grease lubrication, without cleaning, directly filled with grease. Lubricating oil is lubricated, and cleaning is not usually necessary. However, the bearings for instruments or high-speed applications should be washed with clean oil to remove the anti-rust agent coated on the bearings. Bearings with anti-rust agent removed are easy to rust, so they cannot be left alone. In addition, bearings that have been packed with grease can be used directly without cleaning.

The installation method of the bearing varies with the bearing structure, fit, and conditions. Generally, because most of the shaft rotates, the inner ring needs an interference fit. Cylindrical bore bearings are usually pressed in with a press or hot-fitting method. In the case of a tapered hole, install it directly on the tapered shaft or install it with a sleeve.

When installed to the shell, there is generally a lot of clearance fit, and the outer ring has an interference. It is usually pressed in with a press, or there is also a shrink fit method for installation after cooling. When dry ice is used as the coolant, the moisture in the air will condense on the surface of the bearing when the shrink fit is installed. Therefore, appropriate anti-rust measures are required.

Latest News

The historical development of bearings

(Summary description)The early form of linear motion bearings was to place a row of wooden poles under a row of skid plates. Modern linear motion bearings use the same working principle, but sometimes use balls instead of

2022-03-29

Whether the bearing is installed correctly affects the accuracy, life and performance.

2022-03-29

How to ensure the reliable operation of the bearing

(Summary description)Generally speaking, pay attention to the following points from the perspective of use

2022-03-29

The sealing of the bearing can be divided into two types: self-sealing and external sealing.

(Summary description)The sealing of the bearing can be divided into two types: self-sealing and external sealing. The so-called bearing with its own seal is to make the bearing itself into a device with sealing performanc

2022-03-29

Bearing function

(Summary description)In terms of its function, it should be support, that is, it is used to support the shaft literally, but this is only part of its function. The essence of support is to be able to bear radial loads.

2022-03-29

Whether the bearing is installed correctly affects the accuracy, life and performance.

2022-03-29